The other two callers can still talk to each other.… Press the line or intercom button of one caller to consult privately while the other caller is on hold. Note: This feature is not available for multi-party conference calls. To re-establish the conference: Press FEATURE 3.… 1. Press the line or intercom button for the caller you want to disconnect. 2. Press RLS. 3. Press the line or intercom button to resume your conversation with the other caller. To independently hold two calls: 1. Press the line or intercom button of the first caller. 2. Press HOLD. The second caller is automatically put on hold. Note: This feature is not available for multi-party conference calls. To re-establish the conference: 1. Page 4
Edit the number by pressing the volume bar before placing the call.… When you are not on a call, prevent all incoming calls, except priority calls, from ringing at your telephone. When you are on a call, block an incoming priority call.… Use both the handset and speaker while you are on a call. To avoid elec- tronic feedback, keep the handset away from the speaker during the call, and press RLS to hang up. Note: This feature is not available for phase 2 IP Phones or on models 1120E and 1140E.… Handsfree Handsfree/mute or Handsfree button Press the key to transfer a call from the handset/headset to the telephone speaker. If you lifted the handset, return it to the cradle. Page 6
Press FEATURE 64 or an intercom button. 2. Enter a line pool access code. … Send calls arriving on an external line to another telephone outside your system. and a page announcement through either the internal or external speakers, or both . Zone 0 pages all zones. Page announcements are programmed to timeout after a pre-selected amount of time, which is set by your System Administrator.… FEATURE 61 and a page announcement to all, or to a specific group of telephones, through the telephone speakers. Zone 0 pages all zones. External page… Make a page announcement through an external loudspeaker system. Page 8
If a line normally has privacy, this enables another telephone that shares the line to join your call by selecting the line in use. If a line normally has privacy disabled, this prevents another telephone that shares the line from joining your call by selecting the line in use. The privacy setting is re-established once you end your call, or when you enter the Privacy feature code again. Ring again FEATURE 2 Cancel: FEATURE #2 Monitor a busy or unanswered telephone, or a busy line pool within your system. Ring Again signals you to call back when the telephone or line pool becomes available. Ring type FEATURE *6 Select a distinctive ring to help differentiate between your telephone from others nearby. 1. Press FEATURE *6. 2.
|File size:||110.46 KB|